0506748868 | 0508444041

Automatic Road Barriers & Bollards

Automatic electromechanical barrier for heavy duty, complete wihte dedicated unit.ARX.246 for bars 3 to 5 m in length, opening time 1.7-3.8s. ARX.246 For bars 6 to 8 m in lenght, opening time 8s A fanned motor is housed inside coupled to amonlithic oil-lubricated reducer. A safety microswitch is installed as standard feature that inhibits controls when the hatch is opened it also has a "reverser" system that reverses bar direction if it bumps against something, electromechanical limit stops already calibrated puls protective hands cap in black ABS. Suitable for the "electronic toll gate" function. Standard RAL3002 painting whith "orange peel" finish. Up to 10,000 manoeuvres in 24h. (night & day 3-5) up to 2,000 manoeuvres in 24h. (night & day).

Low voltage (24 vdc) automatic electromechnical barrier for condominium service with control unot on board, mod LOG-sb, equipped with an encoder system. Internal gear reducer permanenty lubricated with grease. The optical encoder allows travel to be acquired by means of self-learning, with the possibility of decerating when approaching the end of the manoeuvre both in opening and closing. Supplied with protective hands cap in black ABS. Direction is reversed if the bar bumps against something both in opening and closing. Standard RAL3002 painting withe"orange peel" effect. UP to 1.000 manoeuvres in 24h.

• 230 VAC 50hz supply voltage
• Opening time 5 secons H:600 mm and 6 seconds H:800 mm
• Safety valve that reverses the direction if an obstacle is dete
• Bollard available also in the special safty version,"SCT" wh
• IP 67 protection level
• For intensive use - 3,000 manoeuvres a day